SA-3 cylinder shape burrs are ideal for interior contour work and deburring. Because of the extreme hardness on this tungsten carbide, you can use it on considerably more demanding jobs than HSS (High-Speed Steel).
Double cut or Cross cut carbide burrs are usually used on ferrous and non-ferrous metals, soft steel, as well as for all non-metal materials including stone, plastics, wood, and ceramic. Double cut burrs leaves a slightly smoother finish than single cut on account of producing smaller chips because they cut away the material. Use for medium stock removal, deburring, finishing, and cleaning. A double-cut carbide burr is among the most popular cut and may look at you through most applications.
Machines Used On:
Die Grinders and hand-held pneumatic grinders
Application:
Ferrous Materials – Surefire, Steel, Stainless, Steel, Titanium, Nickel, Wrought Iron
Non-Ferrous Materials – Copper
Many other materials – Fiberglass, Plastic, Hard Rubber, Wood, Stone
Cylinder Shape burrs are good for interior contour work like peripheral and face milling.
Safety Tips & Techniques:
Tool speed is determined from the material you’re using your burr on. If you happen to be experiencing chipping, you are most probably operating at too much of speed for your application. Start using a slower speed while increasing as you go along unless you achieve the ideal results
Apply light pressure and let the tool perform work. Bearing down on the tool will lead to reduced tool life as well as a dull burr.
Always wear proper PPE to include (but not tied to) safety glasses, hearing protection, respirator, and safety gloves. Keep all guards in position on your machine.
Avoid experience electrical energy drills; the slower speeds can lead to chipping of one’s workpiece.
For more details about SA-3 Carbide Burrs go to see our net page
Be First to Comment