SA-1 cylinder shape burrs are ideal for interior contour work and deburring. As a result of extreme hardness of the tungsten carbide, quite a few on a lot more demanding jobs than HSS (High-Speed Steel). These carbide burrs are constructed with tungsten carbide burr die grinder bits and will begin to soften at higher temperatures, so carbide is usually your best option for long-term performance.
Double cut or Cross cut carbide burrs tend to be suited for ferrous and non-ferrous metals, soft steel, and for all non-metal materials for example stone, plastics, wood floor, and ceramic. Double cut burrs leaves a slightly smoother finish than single cut because of producing smaller chips since they cut away the information. Use for medium stock removal, deburring, finishing, and cleaning. A double-cut carbide burr is among the most popular cut and can view you through most applications.
Cut – Double Cut
Max RPM – 70,000, however it is uncommon to wish more than 35,000 RPM.
Machines Used On:
Die Grinders and hand-held pneumatic grinders
Application:
Ferrous Materials – Certain, Steel, Stainless, Steel, Titanium, Nickel, Wrought Iron
Non-Ferrous Materials – Copper
Other Materials – Fiberglass, Plastic, Hard Rubber, Wood, Stone
Cylinder Shape burrs are good for interior contour work like peripheral and face milling.
Safety Tips & Techniques:
Tool speed is decided through the material you’re using your burr on. If you might be experiencing chipping, you’re operating at too high of speed for your application. Start which has a slower speed and increase in the process unless you achieve the the best results
Apply light pressure and allow the tool carry out the work. Bearing recorded on the tool can lead to reduced tool life as well as a dull burr.
Always wear proper PPE to include (but not restricted to) safety glasses, hearing protection, respirator, and safety gloves. Keep all guards in position on the machine.
Avoid use on electric power drills; the slower speeds can result in chipping of your respective workpiece.
For more info about SA-1 Carbide Burrs view this popular site
Be First to Comment