The Xbox has already been a wonderful package alone. However, with games like Call of Duty 5, Modern Warfare, and Modern Warfare 2, more and more people find why you should customize the said gaming console, or its accessories. The type of modification is often a a reaction to build a rapid fire modded Xbox One controller. Here are the steps regarding how to modify your original controller with a rapid fire controller.
The first step. Unscrewing the controller
Before starting taking your controller apart, have a critical look on the controller first and continue to remember which parts go where because you will eventually ought to put everything again. Start with unscrewing each of the visible screws behind. After that, prior to deciding to tug on the case, take away the batteries to disclose the hidden screws. Remove these at the same time.
Step two. Preparing the Case
With the controller facing down, slowly and thoroughly separate the front 1 / 2 of the casing through the circuit board. An opening in the case may ultimately should be made. Remember this before putting things back.
3. Placing The Rapid Fire Button
While other strategies to modifying the controller usually do not involve installation of a brand new button, this kind of guide does. In addition this assist you to adjust the speed of rapid fire, it minimizes tampering to aspects of the circuit board, thereby minimizing the risk of damaging your modded Xbox One console controller.
Remember, kits for the rapid fire controller can be purchased easily. It’s the button out of this kit that will be placed through the hole from the casing, so place it gently ahead of the circuit board is returned. You might have to snip out a number of flaps to generate way for the wires of the kit. This can be done with the cutter or possibly a set of scissors.
Step # 4. Soldering
Let’s assume that xbox one custom controllers know how to effectively utilize a soldering iron, attach the red wire for the leftmost pin of your 4-pin horizontal series, even though the blue wire solders for the rightmost pin of the same series. The black (or green sometimes) wire attaches on the core of the three vertical series off to the right in the switch.
Soldering is among the most crucial factor to making the modded Xbox One console controller. It is because mistakes made during this stage can permanently damage your controller.
Step . 5. Putting everything back
Carefully considering the wires, try and close the circuit board and the casing. This may be a little tricky for the reason that new wires is certain to get in the form of things. Find a method of these wires to occupy the empty spaces as opposed to stuffed. You might hold the modded Xbox controller facedown so that the buttons don’t fall and maneuvering the wires are a little easier. Place the casings together but don’t return the screws yet.
You now need to find out if the rapid fire buttons work. Whenever they don’t, you might need to restart your console and also the now modded Xbox One system controller. This would solve the challenge. When it doesn’t then you might need to go with the steps again to make sure.
To read more about xbox one rapid fire controllers browse our new web site.
Be First to Comment